Gantry Pipe Rolling Machine for Large Size Carbon Fiberglass Tubes, Double Cylinder Press, Ball Screw Drive, Uniform Lamination
✔ Double cylinder pressing design
✔ Ball screw transmission
✔ Suitable for large long composite tubes
- Overview
- Recommended Products
- Carbon fiber pipe manufacturing
- Glass fiber reinforced plastic pipe production
- Long composite tubular product forming
- Large-diameter fiber pipe rolling processing
Product Overview
This LMJG-3000 Gantry Pipe Rolling Machine is designed for the rolling process of carbon fiber and glass fiber pipes with large diameter ratios and long lengths. It adopts double cylinder straight arm pressing structure for the upper plate, and the lower plate is driven by ball screw. The horizontal and vertical movements run stably, ensuring good uniformity between layers and points of rolled workpieces.
Key Advantages
1. Stable Movement & Uniform Rolling Quality
The ball screw drive and frequency conversion reciprocating speed regulation ensure stable horizontal and vertical movement, and consistent compaction of each layer of the pipe workpiece.
2. Dual Cylinder Pressing Structure
Equipped with double lowering cylinders, it provides balanced and reliable pressing force to meet the forming requirements of long fiber pipes.
3. Programmable Length Control
Rolling length adopts computer programmed control, easy parameter setting, high repeat accuracy.
4. Customizable Specifications
Maximum rolling pipe length and pipe diameter can be customized according to customer production demands.
Applications
This machine is widely used in:
Main Equipment Configuration
| No | Name | Qty (set) | Application of equipment |
| 1 | Gantry frame body | 1 | Main supporting structure |
| 2 | Double pressing cylinder | 2 | Upper plate downward pressing |
| 3 | Ball screw transmission assembly | 1 | Lower plate driving & reciprocating movement |
| 4 | Frequency conversion speed control system | 1 | Adjust reciprocating speed |
| 5 | Computer programming controller | 1 | Rolling length setting & operation control |
| 6 | Heating module | 1 | Heating during pipe rolling |
| 7 | Electric motor | 1 | Power drive |
| 8 | Pneumatic control assembly | 1 | Air source pressure control |
FAQ
Q1: Can the rolling length and pipe diameter be customized?
Yes, the max pipe rolling length and max rolling diameter can be customized as your requirements.
Q2: What is the working capacity of this machine?
It can reach 1500 knots per shift under normal working conditions.
Q3: What is the required air source for the equipment?
The required air source pressure is 0.4-0.6MPa, and the power supply is 380V/50Hz.








