EN
- Overview
- Recommended Products
This equipment is used for inter turn coking of coils, where multiple turns are bonded by high-temperature compression and kneading between turns
As a whole, it is not easy to deform during the expansion process.
The product adopts screw linkage technology, which automatically and continuously completes the coil processing process by adjusting or replacing some adjustment devices and fixtures.
Project Content
1. Main oil cylinder speed adjustment and supporting devices. ←
2. Maximum external dimension: 2000mm ←
3. Straight length: 1750mme
4. Opening pitch: 80mme
5. Adopting automatic pre pressing (low pressure 0.6-1.0Mpa) process, automatically filling the pressure after 2 minutes (6MPA)
